業界螺旋通風管的幾種常見連接方法

 

Several common connection methods of spiral ventilation pipe in industry

 

連接螺旋通風管道的方法有很多。 一般而言，實際上我們必須注意這樣一個事實，即在連接螺旋螺旋風管時，切口應緊密而牢固。 矩形風管的四個角必須放置并密封。 之后，連接到風管的兩條管道應立即伸直，并且不得錯位或扭曲。

 

There are many ways to connect spiral ducts. Generally speaking, in fact, we must pay attention to the fact that when connecting spiral duct, the cut should be tight and firm. The four corners of the rectangular duct must be placed and sealed. After that, the two pipes connected to the air duct shall be straightened immediately and shall not be dislocated or twisted.

 

 

 

螺旋通風管道的連接方法在工業上，首先是螺旋管道箍的連接。 關于這種連接方法，每個管段的兩端都將被卷成凸起，并且其一端將直接收縮成小口。 在安裝過程中，小口將根據氣流方向直接插入大口，鋼管將用于直接緊密連接兩個管端的凸起。 最后，將螺栓戴在耳環上擰緊并擰緊。

 

The connection method of spiral ventilation pipe in industry, the first is the connection of spiral pipe hoop. With regard to this connection method, both ends of each pipe section will be rolled into bulges and one end will be directly contracted into a small opening. During the installation process, the small opening will be directly inserted into the large opening according to the air flow direction, and the steel pipe will be used to directly and tightly connect the bulges of the two pipe ends. Finally, put the bolts on the earrings and tighten them.

 

 

 

此外，將使用螺旋通風管道的連接，即插入式連接。 這種連接方式主要用于矩形或圓形風管的連接。 首先制作連接管，然后插入兩側的風管，然后直接使用自攻螺釘。 或拉動指甲將其牢固固定。

 

In addition, the connection of spiral ventilation ducts, i.e. plug-in connections, will be used. This connection method is mainly used for the connection of rectangular or circular duct. First make the connecting pipe, then insert the air duct on both sides, and then use the self tapping screw directly. Or pull the nail to fix it firmly.

 

 

 

當然，關于螺旋通風管道的連接，即，將使用插入式連接。 這種連接方式與矩形風管的連接方式是將不同類型的插入件插入風管的兩端，因此有必要注意拆卸。 對于其形狀和接管方法，有必要注意特定的注意事項，即不要出錯。

 

Of course, with regard to the connection of spiral ducts, i.e., plug-in connections will be used. This connection method with rectangular duct is to insert different types of inserts into both ends of the duct, so it is necessary to pay attention to disassembly. For its shape and take over method, it is necessary to pay attention to specific precautions, that is, do not make mistakes.

 

 

 

最后，螺旋通風管的連接，即軟管連接。 螺旋通風管主要用于將軟臂的兩端套上套管時，螺旋風管與部件（如擴壓器靜壓箱側進氣口等）的連接。 除了連接管外，接下來要注意的是，應使用特殊的軟卡擰緊軟管。

 

Finally, the screw ventilation pipe connection, that is, the hose connection. The spiral ventilation pipe is mainly used to connect the spiral air duct and components (such as the inlet on the side of the diffuser static pressure box) when the two ends of the flexible arm are jacketed. In addition to the connecting pipe, the next thing to note is that the hose should be tightened with a special soft clip.